Hello friends, in this case we are going to hold the transducer cable and at the same time we will put an anti-slip (eva thin rubber) for those who want to spining and not slip or just stand up in our Wahoo.

The first thing we do is anchor our translator to the hull of the Wahoo passing the cable through the hole of the autovaciable and taking it to where the anchorage of the probe, I as I explained in the previous I have it in my Railblaza tray in the bow.

Once we have it presented where we want to have the cable and tensing the cable so that it is perfect we will put one of the self-emptying plugs in order to have the cable tense.

We will thoroughly clean the areas to be treated with alcohol to ensure its sealing. Next we will take a hot silicone gun and passing the cable through the water drain of Wahoo we will hold with a screwdriver or another tool the cable and we will be throwing silicone as shown in the photo.

Once the whole channel has been filled and cooled, it will be such that:

So that it is not so ugly and taking advantage to cover and that we have an anti-slip we cut two pieces that correspond from self-emptying to self-emptying and we stick the edges in the same way with the silicone gun

And once finished we will have covered our cable and a great security slip.

As not always giving my thanks to my particular technician..Sanjaime90

Thank you very much for reading and I hope you like it